DC96-00774A-ER for Samsung Washer seamlessly replaces DC96-00774A, assuring your home appliance's peak performance and durability.
Our replacement component is made with durability and accuracy, and it is intended to match or surpass OEM specifications, so it will fit perfectly and perform dependably.
DC96-00774A-ER - Compatible with:
- Samsung
- Kenmore
- Decor
DC96-00774A-ER Fixes and Solutions:
- Water backup issues
- Frequent error codes
- Pump motor failure
- Clogged pump filter
- Inconsistent spin cycle
- Inability to start
DC96-00774A-ER Replaces:
- DC96-00774A-ER
- DC96-00774A
- DC9600774A
- 2074081
- 1122394
- 34001320
- AH11741564
- AP6008427
- B00EECJRSG
- EA11741564
- EAP11741564
- AP4207800
- LP0774A
Perfect Fit Models for DC96-00774A-ER:
- WF306BHW
- WF306BHW/XAA
- WF306LAW
- WF306LAW/XAA
- WF316BAC
- WF316BAC/XAA
- WF316BAW
- WF316BAW/XAA
- WF316LAS
- WF316LAS/XAA
- WF316LAW
- WF316LAW/XAA
- MAH6700AWM
- MAH6700AWW
- MAH8700AWM
- MAH8700AWW
- MAH9700AWM
- MAH9700AWW
How to test Drain Pump Motor?
- Unplug the Washer
- Ensure the washer is unplugged from the power source to prevent electrical hazards.
- Locate the Drain Pump Motor
- The drain pump motor is usually located at the bottom of the washer, near the drain hose and pump assembly. Depending on the model.
- You may need to remove the front panel or lower access panel.
- Disconnect the Drain Pump Motor
- Once you have access, disconnect any wires attached to the drain pump motor to isolate it for testing.
Some useful diagnosing tips
- Remove access panel if needed.
- Disconnect wires from the motor.
- Use multimeter to check continuity.
- Test for resistance (should show continuity).
- Inspect for obstructions or damage.
- Replace if faulty.